Aerogels Flexible Thermal Insulation Aerogel 800J
Product Introduction
Aerogel, known as the “world’s best insulating solid material,” is used to enhance the thermal performance of energy-saving materials and sustainable products for buildings, on- and off-shore industrial infrastructure and consumer products, as well as acting as a high performance additive to coatings and personal care offerings. Our product line enables a wide range of product forms and applications, including:
Excellent Performance
1. Low thermal conductivity is only 1/3 to 1/5 of traditional materials.
2. Drowning rate >99.5% moisture absorption rate <0.5%.
3. High fire rating: fire performance A1, smokeless, no droplets, no harmful gases.
4. Green environmental protection: non-toxic materials without corrosion.
5. Convenient construction: aerogels are thin, tensile and compressive. Low density and light weight. The utility knife can be cut without the need for professional tools and equipment.
6. Long service life: aerogel has a unique three-position network structure, long-term use shrinkage rate ≤1% at 650°C, and no melt sintering, powdering, aerogel is an inorganic material, UV long-term exposure is not aging, weather resistance Good service life can reach more than 20 years.
Product Specification
800J
| Product Form: |
Coil |
| Thickness: |
3~50mm |
| Width: |
1000mm/1500mm |
| Thermal Conductivity |
0.018W/(m.K)( 800℃) |
| Maximum Use Temperature |
800℃ |
| Density |
165~170kg/ m3 |
| Fire-proof Level |
A1Level (GB/T 8624-2012) |
| Hydrophobic |
<0.5% (GB/T 205480-2008) |
| Main Applicaton |
Thermal power plants, chemical plant piping equipment; steel insulation; all kinds of high and low temperature furnaces. |
